Description
Type I Ultrapure Water from Niche Healthcare provides a ready-to-use source of high-purity laboratory water for demanding analytical, scientific and research applications where contaminants in water could interfere with analytical performance.
The product is supplied to an ASTM D1193-06 (2018) Type I specification, with stated resistivity of 18 MΩ, conductivity of 0.0555 µS/cm, Total Organic Carbon (TOC) of ≤50 µg/L, sodium of ≤1 µg/L, chloride of ≤1 µg/L and total silica of ≤3 µg/L. Each order is supplied with full batch traceability and a Certificate of Analysis. Niche Office Solutions Ltd
Available volumes range from 100 ml to 27,000 litres, providing options for individual laboratory requirements, contingency supplies, defined project quantities and substantial bulk requirements. Niche Office Solutions Ltd
What Is Type I Ultrapure Water?
Type I is a high-purity laboratory water classification associated with demanding analytical applications.
ASTM D1193 defines four reagent-water types and specifies requirements relating to properties including electrical conductivity, resistivity, TOC, sodium, chloride and silica. Importantly, ASTM explains that the Type I–IV terminology reflects historical precedence rather than a simple progression in water purity. ASTM Store
The current Niche Healthcare product is manufactured to the stated ASTM D1193-06 (2018) Type I specification. Its specification should therefore be considered against the requirements of the particular analytical method, instrument and laboratory quality system rather than relying on the term “ultrapure” alone. Niche Office Solutions Ltd
Type I Ultrapure Water Specifications
|
Specification |
Product information |
|
Water grade |
Type I Ultrapure Water |
|
Standard |
ASTM D1193-06 (2018) |
|
Resistivity |
18 MΩ |
|
Conductivity |
0.0555 µS/cm |
|
Total Organic Carbon (TOC) |
≤50 µg/L |
|
Sodium |
≤1 µg/L |
|
Chloride |
≤1 µg/L |
|
Total silica |
≤3 µg/L |
|
Available volumes |
100 ml to 27,000 litres |
|
Batch traceability |
Yes |
|
Certificate of Analysis |
Provided with every order |
|
Shelf life |
6 months when stored correctly |
|
Chemical additives |
None stated |
|
Model number |
NH-134556 |
|
SKU |
NH-134556 – WTN1093496 |
These are the published specifications for the Niche Healthcare product. Niche Office Solutions Ltd
Why Water Purity Matters in Analytical Laboratories
Water can form a significant part of analytical workflows, including sample preparation, blanks, standards, mobile phases and reagent preparation. Contaminants introduced through laboratory water can therefore become an unwanted source of analytical interference.
This becomes increasingly important as analytical techniques become more sensitive.
For example, guidance for ICP-MS notes that water that does not meet an appropriate ultrapure specification can contribute to elevated calibration blanks and interfere with ultra-trace detection. Thermo Fisher Documents
High-purity water should therefore be treated as a laboratory reagent whose specification needs to match the analytical procedure rather than simply as purified drinking water.
Type I Ultrapure Water for HPLC and UHPLC
High-performance liquid chromatography can be particularly sensitive to contaminants within the water used for mobile phases, standards and sample preparation.
Specialist laboratory-water guidance recommends freshly purified Type I water with very low ionic and organic contamination for demanding HPLC and UHPLC applications. Water quality can affect background signals and ultimately analytical performance. Merck Millipore
The Niche Healthcare product is intended for applicable HPLC and UPLC workflows where its ASTM specification meets the requirements of the method and instrumentation. Niche Office Solutions Ltd
Laboratories requiring additional HPLC-specific parameters beyond the published specification should verify these requirements before use.
Type I Water for LC-MS and Mass Spectrometry
LC-MS and LC-MS/MS combine chromatographic separation with highly sensitive mass-spectrometric detection, making contamination control particularly important.
Type I water is commonly associated with advanced analytical techniques including LC-MS. Independent laboratory-water guidance identifies Type I ultrapure water as appropriate for critical applications including HPLC, LC-MS and ICP-MS. Merck Millipore
For LC-MS/MS workflows, laboratories should still confirm that all relevant water-quality requirements of the validated method and instrument manufacturer are satisfied.
Type I Water for ICP-MS and Elemental Analysis
ICP-MS is capable of detecting elements at extremely low concentrations, which means trace contamination from laboratory water can become analytically significant.
Specialist guidance for ICP analysis highlights the importance of controlling ionic contamination, particles, bacteria and organic contaminants. High ionic contamination can affect analytical sensitivity and contribute to inaccurate results. Merck Millipore
The Niche Healthcare Type I Ultrapure Water may therefore be considered for applicable ICP-MS workflows where the stated ASTM specification satisfies the analytical method’s requirements.
For ultra-trace analysis, laboratories should determine whether tighter application-specific contaminant limits are required beyond the standard Type I specification.
Molecular Biology, Genomics and Life Sciences
Type I water is also widely associated with molecular biology and life-science laboratory applications. These can include PCR, sequencing, electrophoresis and other sensitive experimental workflows. Merck Millipore
However, Type I does not automatically mean nuclease-free.
Where an assay specifically requires certified DNase-free, RNase-free or nuclease-free water, a dedicated water grade verified for those characteristics should be selected rather than assuming that standard Type I water meets those additional requirements.
The same principle applies to endotoxin-controlled applications and other specialist biological procedures.
Suitable Laboratory Environments
Type I Ultrapure Water may be relevant to NHS and private pathology laboratories, analytical laboratories, university research departments, pharmaceutical and biotechnology laboratories, molecular diagnostics facilities, biomedical research laboratories, chemistry laboratories and other specialist scientific environments.
Potential applications include HPLC and UPLC, LC-MS/MS, ICP-MS, applicable GC-MS preparation workflows, molecular biology, genomics and cell-culture procedures where the water specification satisfies the laboratory’s requirements. Niche Office Solutions Ltd
The product may also be relevant to semiconductor and microelectronics applications requiring high-purity water. Niche Office Solutions Ltd
Ready-to-Use Type I Water Versus On-Site Purification
Many laboratories produce ultrapure water using an on-site purification system. A ready-to-use external supply provides a different procurement model rather than necessarily replacing an existing laboratory water system.
|
Consideration |
Ready-to-use Type I water |
On-site purification system |
|
Initial purification equipment |
Not required for supplied water |
Purification equipment required |
|
Volume flexibility |
100 ml to 27,000 L for this product |
Determined by system capacity |
|
Batch documentation |
Certificate of Analysis supplied |
Depends on laboratory monitoring and documentation |
|
Batch traceability |
Provided for this product |
Managed internally |
|
Maintenance of purification equipment |
Not required for production of supplied water |
Filters, cartridges and system maintenance required |
|
Contingency use |
Can provide backup supply |
Dependent on system availability |
|
Point-of-use production |
No |
Yes |
|
Suitability for continuous high-volume use |
Depends on procurement requirements |
Depends on system capacity |
The appropriate approach depends on laboratory demand, analytical requirements, infrastructure, quality-management procedures and cost considerations.
A laboratory may also use both approaches—for example, an on-site system for routine production with externally manufactured water retained for contingency, specialist projects or documented batch requirements.
Type I, Type II and Type III Laboratory Water
Different laboratory water grades should not be treated as interchangeable.
|
Water type |
General application context |
|
Type I / ultrapure water |
Critical and sensitive analytical applications |
|
Type II / pure water |
General laboratory applications and reagent preparation |
|
Type III / RO water |
General laboratory supply and less critical applications |
Specialist laboratory-water guidance commonly associates Type I water with techniques including HPLC, LC-MS and ICP-MS, while Type II water is associated with more general laboratory requirements and Type III reverse-osmosis water with basic laboratory applications. Merck Millipore
Actual selection should always be based on the applicable method or standard.
ASTM D1193 and Type I Water
ASTM D1193 establishes specifications for reagent water used in analytical measurements.
The current ASTM D1193 standard specifies four water types and additional grades addressing contaminants of microbiological origin. ASTM specifically notes that these types should not simply be interpreted as a progression in purity. ASTM Store
The Niche Healthcare product is supplied to the stated ASTM D1193-06 (2018) Type I specification. Niche Office Solutions Ltd
Laboratories working under a specific accreditation, pharmacopoeial method, ISO procedure or validated analytical method should check the precise water specification required by that procedure.
ASTM Type I and ISO 3696 Grade 1 Are Not Identical Terms
Laboratories may encounter both ASTM Type I and ISO 3696 Grade 1 during procurement.
They should not automatically be treated as interchangeable specifications.
ISO 3696:1987 defines three grades of water for analytical laboratory use and specifies requirements and test methods. ISO states that this standard is intended for analysis of inorganic chemicals and is not applicable to organic trace analysis, analysis of surface-active agents or biological or medical analysis. The standard was reviewed and confirmed in 2023 and remains current. ISO
Procurement teams should therefore specify the actual standard required by the laboratory rather than requesting “ultrapure water” without further qualification.
Procurement Considerations
Laboratory-water procurement should begin with the analytical requirement.
Useful information includes the required water standard, application, volume, frequency of use, preferred container format and any additional purity requirements.
For this product, quantities can range from 100 ml to 27,000 litres, supporting requirements from small laboratory quantities through to bulk supply. Full batch traceability and a Certificate of Analysis are provided. Niche Office Solutions Ltd
Application-specific cap solutions, non-standard container formats and custom labelling are also available for specialist requirements. Niche Office Solutions Ltd
For sensitive analytical work, laboratories should review the Certificate of Analysis and product specification against the validated method and instrument requirements before use.
Specialist Water Requirements
Type I water does not automatically satisfy every specialist laboratory-water specification.
Additional or different controls may be required for applications involving:
Nuclease-sensitive molecular biology: Procedures may require specifically verified DNase-free and RNase-free water.
PFAS analysis: PFAS testing can require water and laboratory materials specifically controlled for PFAS contamination.
Endotoxin-sensitive procedures: A defined endotoxin specification may be required.
Ultra-trace elemental analysis: Individual elemental limits may need to be substantially lower than a general reagent-water specification.
Cell and tissue culture: The laboratory should follow the requirements of the specific protocol, media preparation procedure and quality system.
Selecting water according to the actual contaminant profile required by the method can be more important than selecting solely by the broad Type I designation.
Storage and Handling Considerations
The published shelf life for this product is six months when stored correctly. Niche Office Solutions Ltd
High-purity water can be vulnerable to contamination after manufacture or opening. Laboratories should therefore follow the supplied storage instructions and use appropriate handling practices to avoid introducing environmental, container or operator-derived contamination.
For analytical applications, laboratories should also consider whether their procedure requires freshly produced water or permits appropriately stored pre-manufactured water.
Frequently Asked Questions
What is Type I Ultrapure Water?
Type I Ultrapure Water is a high-purity laboratory water grade used for demanding analytical and scientific applications. This Niche Healthcare product is supplied to the stated ASTM D1193-06 (2018) Type I specification. Niche Office Solutions Ltd
What is the resistivity?
The published resistivity is 18 MΩ, with conductivity of 0.0555 µS/cm. Niche Office Solutions Ltd
What is the TOC specification?
The published Total Organic Carbon specification is ≤50 µg/L. Niche Office Solutions Ltd
What are the sodium and chloride limits?
Both sodium and chloride have published limits of ≤1 µg/L. Total silica is specified at ≤3 µg/L. Niche Office Solutions Ltd
Is a Certificate of Analysis supplied?
Yes. A Certificate of Analysis is supplied with every order, together with full batch traceability. Niche Office Solutions Ltd
What volumes are available?
Available quantities range from 100 ml to 27,000 litres. Niche Office Solutions Ltd
Can Type I Ultrapure Water be used for HPLC?
HPLC and UPLC are among the stated applications. Independent laboratory-water guidance also identifies Type I water as relevant to demanding chromatography applications. Niche Office Solutions Ltd
The laboratory should confirm that the specific product specification meets its analytical method and instrumentation requirements.
Is it suitable for LC-MS/MS?
LC-MS/MS is included among the stated applications. Suitability should be confirmed against the requirements of the particular method and instrument. Niche Office Solutions Ltd
Can it be used for ICP-MS?
ICP-MS is a stated application. Because ICP-MS can be highly sensitive to trace elemental contamination, laboratories should ensure that the complete specification is appropriate for the detection limits and elements being analysed. Niche Office Solutions Ltd
Is Type I water the same as deionised water?
Not necessarily. Deionisation primarily addresses ionic contaminants, while ultrapure-water production can involve additional purification technologies designed to control a broader range of contaminants. Specialist analytical guidance warns against treating the terms ultrapure water and deionised water as interchangeable. Thermo Fisher Documents
Is Type I water automatically nuclease-free?
No. Type I classification should not be interpreted as confirmation that water is DNase-free or RNase-free. Where nuclease-free water is required, a product specifically verified for that requirement should be selected.
Is ASTM Type I the same as ISO 3696 Grade 1?
They are separate specifications and should not automatically be treated as equivalent. ISO 3696 defines three grades for analytical laboratory water, while ASTM D1193 specifies four reagent-water types. ISO
What is the shelf life?
The published shelf life is six months when stored correctly. Niche Office Solutions Ltd
Is bulk Type I Ultrapure Water available?
Yes. Available volumes extend to 27,000 litres, allowing the product to support both smaller laboratory requirements and substantial bulk applications. Niche Office Solutions Ltd
Further Information and Authoritative Sources
Niche Healthcare – Type I Ultrapure Water:
https://www.nicheofficesolutions.co.uk/product/type-i-ultrapure-water/
ASTM International – ASTM D1193 Standard Specification for Reagent Water:
https://store.astm.org/d1193-24.html
International Organization for Standardization – ISO 3696:1987, Water for Analytical Laboratory Use:
https://www.iso.org/standard/9169.html
Conclusion
Type I Ultrapure Water provides laboratories with a ready-to-use high-purity water supply for demanding analytical and scientific applications, including appropriate HPLC, UPLC, LC-MS/MS and ICP-MS workflows.
With a stated ASTM D1193-06 (2018) Type I specification, 18 MΩ resistivity, 0.0555 µS/cm conductivity, ≤50 µg/L TOC, full batch traceability and Certificate of Analysis, the product provides a defined specification for laboratories requiring externally manufactured ultrapure water. Available quantities from 100 ml to 27,000 litres also support requirements ranging from individual laboratory applications to substantial bulk supply. Niche Office Solutions Ltd
Laboratories should select water according to the complete requirements of their analytical method, instrumentation and quality system, particularly where additional controls for nucleases, endotoxins, PFAS or ultra-trace contaminants are required.
Downloadable Resources:
Laboratory Water Specification Sheet
Blog:
Laboratory Water Purity: Could Your Water Be Affecting Test Results?
Published by Maisie McNamara | Clinical Marketing Team

Laboratory Water Infographic
See our full selection:
Healthcare Supplies in Aberdeen | Niche Healthcare
Healthcare Supplies in Basildon | Niche Healthcare
Healthcare Supplies in Basingstoke | Niche Healthcare
Healthcare Supplies in London | Niche Healthcare
For procurement details, bulk purchasing, and further product information, contact our team today on 01274 965089 or check out our website at www.nicheofficesolutions.co.uk / www.nicheofficesolutions.co.uk/niche-nhs
Further clinical information can be found on our blog page: www.nicheofficesolutions.co.uk/category/niche-healthcare-news
For products not found on our online website, please view our Healthcare catalogues: www.nicheofficesolutions.co.uk/healthcare-catalogues
View our Healthcare YouTube videos Playlist
If you have any additional questions, drop us an email at info@nicheofficesolutions.co.uk







Reviews
There are no reviews yet.