Type IV Pre-treated Water

Niche Healthcare

Call For Pricing.

Model Number: NH-134559

SKU: NH-134559 - WTN1093499 Category: Tag:

Description

Focus keyword: Type IV Pre-treated Water

SEO title: Type IV Pre-treated Water for Laboratory & Process Use

Permalink: type-iv-pre-treated-water

Meta description: Type IV Pre-treated Water with 0.2 MΩ resistivity for cooling circuits and feedwater for RO, deionisation and distillation systems.

Type IV Pre-treated Water

Type IV Pre-treated Water from Niche Healthcare, also labelled as Process Water, provides a ready-to-use purified water supply for general laboratory, technical and water-treatment applications where a defined pre-treated water quality is required.

The product is supplied to an ASTM D1193 Type IV specification, with stated resistivity of 0.2 MΩ, conductivity of 5 µS/cm, pH of 5.8, sodium of ≤50 µg/L and chloride of ≤50 µg/L. Full batch traceability and a Certificate of Analysis are provided. Niche Office Solutions Ltd

Available quantities range from 100 ml to 27,000 litres, providing flexibility for smaller requirements, contingency supplies, equipment feedwater and substantial bulk applications. Niche Office Solutions Ltd

What Is Type IV Pre-treated Water?

Type IV water is one of four reagent-water types defined by ASTM D1193.

ASTM explains that Type IV reagent water may be produced using processes including distillation, ion exchange, continuous electrodeionisation, reverse osmosis, electrodialysis or combinations of appropriate technologies, provided the required constituent specifications are achieved. ASTM Store

Importantly, ASTM states that the Type I, II, III and IV classifications reflect historical precedence and should not be interpreted simply as a progression in water purity. The appropriate water type should instead be selected according to its specification and intended application. ASTM Store

For this product, Type IV water is primarily intended for general laboratory infrastructure, technical processes and feedwater applications, rather than highly sensitive analytical testing.

Type IV Pre-treated Water Specifications

Specification

Product information

Water grade

Type IV Pre-treated Water / Process Water

Standard

ASTM D1193

Resistivity

0.2 MΩ

Conductivity

5 µS/cm

pH

5.8

Sodium

≤50 µg/L

Chloride

≤50 µg/L

Available volumes

100 ml to 27,000 litres

Batch traceability

Full batch traceability

Certificate of Analysis

Provided

Shelf life

6 months when stored correctly

Chemical additives

None stated

Model number

NH-134559

SKU

NH-134559 – WTN1093499

These are the published characteristics of the Niche Healthcare product. Niche Office Solutions Ltd

Why Use Type IV Pre-treated Water?

Water requirements differ considerably between laboratory processes and equipment.

Highly sensitive analytical techniques can require ultrapure Type I water because very small concentrations of contaminants may interfere with analytical measurements. General technical processes and feedwater applications often have very different requirements.

Type IV Pre-treated Water provides a defined water specification for compatible processes that do not require Type I or Type II water.

This can make Type IV water particularly relevant as feedwater for further purification processes and for selected non-critical technical applications where the equipment manufacturer permits its use.

Why Is It Also Called Process Water?

The product may be labelled Process Water because its intended applications include general technical and water-treatment processes.

“Process water” is a broad descriptive term rather than a substitute for the actual product specification. When assessing suitability, laboratories and procurement teams should therefore consider the measurable Type IV characteristics rather than relying solely on the wording used on the container.

For this product, the relevant published characteristics include 0.2 MΩ resistivity, 5 µS/cm conductivity, pH 5.8 and defined sodium and chloride limits. Niche Office Solutions Ltd

Type IV Pre-treated Water for Reverse Osmosis Feedwater

Reverse osmosis is widely used as part of laboratory and technical water-treatment systems.

The Niche Healthcare Type IV product can be considered as feedwater for compatible reverse osmosis systems where its published specification satisfies the incoming water requirements of the equipment. Niche Office Solutions Ltd

RO systems can differ significantly in their permissible feedwater conditions. Factors beyond conductivity may also influence suitability and system performance.

The water requirements specified by the particular reverse-osmosis system manufacturer should therefore be checked before use.

Feedwater for Deionisation Systems

Type IV Pre-treated Water can also provide feedwater for compatible deionisation systems. Niche Office Solutions Ltd

Deionisation systems remove ionic contaminants from water through ion-exchange or related technologies. Feeding these systems with appropriately pre-treated water can form one stage of a broader laboratory water-purification process.

However, the Type IV classification alone should not be treated as confirmation of compatibility with every deionisation system. The required incoming-water specification should be checked for the individual equipment.

Feedwater for Distillation Systems

Distillation feedwater is another stated application for this Type IV product. Niche Office Solutions Ltd

Distillation involves vaporising water and subsequently condensing the resulting vapour as part of the purification process.

Type IV water can provide a defined pre-treated supply for compatible distillation systems where its specification meets the requirements established for the equipment.

Type IV Water for Cooling Circuits

Type IV Pre-treated Water may also be used within compatible cooling circuits requiring an appropriately specified pre-treated water supply. Niche Office Solutions Ltd

Cooling equipment can have its own requirements relating to water chemistry, corrosion, mineral deposition and microbial management.

For that reason, Type IV water should not automatically be introduced into every cooling system simply because it is purified. The equipment or system specification should determine the required water quality.

Non-Critical Condenser Applications

The product is also intended for appropriate non-critical condenser applications. Niche Office Solutions Ltd

Using water with a controlled specification can provide a more defined input than an uncontrolled water source where a technical process requires pre-treated water.

As with cooling circuits, compatibility should be assessed against the condenser manufacturer’s requirements and the wider operating conditions of the system.

Type IV Pre-treated Water in Laboratory and Healthcare Environments

Within laboratories and healthcare facilities, Type IV water is primarily relevant to infrastructure, equipment and water-treatment processes rather than direct use in sensitive analytical testing.

Potential environments include hospital laboratories, NHS pathology services, university laboratories, research facilities, pharmaceutical organisations, biotechnology facilities, analytical laboratories and scientific or technical facilities operating compatible water-treatment equipment.

Actual suitability depends on the process or equipment specification rather than the department in which the water is being used.

Type I, Type II, Type III and Type IV Water Compared

Laboratory and technical water grades should be selected according to the required specification and application.

Water grade

General application context

Typical application examples

Type I

Critical ultrapure applications

HPLC, LC-MS, ICP-MS and other sensitive analytical techniques

Type II

General analytical laboratory applications

Reagent and buffer preparation and appropriate laboratory equipment

Type III

General laboratory and equipment applications

Glassware rinsing, compatible autoclave feedwater and purification-system feedwater

Type IV

General technical and pre-treatment applications

Cooling circuits and feedwater for RO, deionisation and distillation

ASTM D1193 specifies four reagent-water types and expressly cautions that their numbering should not be regarded simply as a ranking of water purity. ASTM Store

The most appropriate grade is therefore the one whose characteristics satisfy the requirements of the process.

Type IV Water Versus Type III General Lab Water

Type III and Type IV water can both form part of laboratory infrastructure, but they have different published specifications.

The Niche Healthcare Type III General Lab Water has a published resistivity of 4 MΩ and conductivity of 0.25 µS/cm, while this Type IV Pre-treated Water has a resistivity of 0.2 MΩ and conductivity of 5 µS/cm.

Type III is positioned for applications including compatible glassware washers, autoclave feedwater and pure-steam generation, while Type IV is intended principally for general technical operations and feedwater for further purification.

The intended equipment or process should determine which specification is appropriate.

Type IV Water Versus Ordinary Mains Water

A significant difference between Type IV reagent water and ordinary mains water is that Type IV water is supplied to a defined laboratory reagent-water specification.

Mains water is produced for potable water requirements rather than ASTM reagent-water specifications and its mineral and ionic composition can vary according to source and treatment.

Where equipment requires a defined pre-treated feedwater specification, an ASTM Type IV product can therefore provide a controlled alternative.

This does not mean Type IV water is required for every piece of laboratory equipment. The manufacturer’s feedwater specification remains the appropriate reference.

ASTM Type IV Water and ISO 3696

ASTM D1193 and ISO 3696 are separate laboratory-water standards.

ISO 3696 specifies three grades of water for the analysis of inorganic chemicals. ISO states that the standard does not apply to organic trace analysis, analysis of surface-active agents, or biological or medical analysis. The 1987 edition was reviewed and confirmed in 2023 and remains current. ISO

ASTM D1193, by comparison, specifies four reagent-water types, including Type IV. ASTM Store

An ASTM Type IV specification should therefore not automatically be described as equivalent to a particular ISO 3696 grade.

Ready-to-Use Type IV Water Versus On-Site Treatment

Laboratories and technical facilities may either produce pre-treated water internally or procure it as a ready-to-use supply.

Consideration

Ready-to-use Type IV water

On-site water treatment

Treatment equipment required

Not required for supplied water

Required

Available quantity

100 ml to 27,000 L for this product

Depends on system output

Batch traceability

Provided

Managed internally

Certificate of Analysis

Provided for supplied product

Depends on internal testing arrangements

Treatment-system maintenance

Not required to produce supplied water

Required

Contingency use

Can provide an alternative supply

Dependent on system availability

Point-of-use production

No

Yes

Bulk supply

Available

Depends on equipment capacity

A ready-to-use supply can be particularly relevant during purification-system maintenance, temporary projects, periods of increased demand or where producing the required water specification on site is impractical.

Available Volumes and Bulk Type IV Water

The product is available in quantities ranging from 100 ml to 27,000 litres. Niche Office Solutions Ltd

This range enables the same Type IV water specification to support smaller technical requirements and substantial bulk-water demand.

Application-specific cap solutions, non-standard container formats and custom labelling are also available for specialist requirements. Niche Office Solutions Ltd

Batch Traceability and Certificate of Analysis

Full batch traceability is provided, enabling individual supplied batches to be identified.

A Certificate of Analysis is also provided, giving laboratories and technical organisations documented information relating to the supplied water batch. Niche Office Solutions Ltd

Where the water will be used as equipment feedwater, the relevant specification and Certificate of Analysis should be reviewed against the requirements of the equipment or process.

Procurement Considerations

Procurement of process and laboratory water should begin with the technical requirement rather than simply the description “purified water”.

Useful parameters include required conductivity, resistivity, pH, sodium, chloride, volume, packaging format, storage requirements and intended application.

For this product, procurement teams can specify quantities from 100 ml to 27,000 litres, while full batch traceability and a Certificate of Analysis support documentation requirements. Niche Office Solutions Ltd

Where Type IV water will be used as feedwater, the equipment manufacturer should be consulted to establish the permitted incoming-water specification.

Storage and Handling

The published shelf life is six months when stored correctly, and no chemical additives are stated. Niche Office Solutions Ltd

Water quality can change through inappropriate storage or contamination during handling and dispensing. Containers should therefore be stored and handled in accordance with the applicable product information.

Where the supplied water specification is important to a process, contamination should be minimised during transfer and dispensing.

Frequently Asked Questions

What is Type IV Pre-treated Water?

Type IV Pre-treated Water is reagent water intended for appropriate general laboratory and technical applications. This product is supplied to a stated ASTM D1193 Type IV specification. Niche Office Solutions Ltd

Why is the product labelled Process Water?

Process Water is an alternative description used for this product because its applications include general technical processes and feedwater for further water treatment.

What is the resistivity?

The published resistivity is 0.2 MΩ. This corresponds with the ASTM Type IV minimum resistivity specified in the ASTM D1193 reference data. Niche Office Solutions Ltd

What is the conductivity?

The published conductivity is 5 µS/cm. ASTM’s Type IV specification also identifies 5 µS/cm at 25°C as the maximum electrical conductivity. Niche Office Solutions Ltd

What is the pH?

The product’s published pH is 5.8. ASTM D1193 specifies a pH range of 5.0–8.0 for Type IV reagent water. Niche Office Solutions Ltd

What are the sodium and chloride specifications?

Sodium and chloride are both specified at ≤50 µg/L. Niche Office Solutions Ltd

Can Type IV water be used as reverse-osmosis feedwater?

Reverse-osmosis feedwater is a stated application for this product. The requirements of the particular RO system should be checked before use. Niche Office Solutions Ltd

Can Type IV water be used with deionisation systems?

Yes, feedwater for compatible deionisation systems is a stated application. Equipment-specific requirements should still be confirmed. Niche Office Solutions Ltd

Can it be used as distillation feedwater?

Yes. Distillation-system feedwater is one of the stated applications, subject to compatibility with the individual system. Niche Office Solutions Ltd

Can Type IV water be used in cooling circuits?

Compatible cooling circuits are a stated application. The cooling-system manufacturer’s water-quality requirements should be checked before use. Niche Office Solutions Ltd

Is Type IV water suitable for HPLC?

Type IV water should not generally be substituted for the high-purity water specified for sensitive analytical applications such as HPLC. The analytical method and instrument requirements should determine the water specification.

Is Type IV water suitable for LC-MS or ICP-MS?

Type IV pre-treated water is intended for general technical and feedwater applications rather than highly sensitive LC-MS or ICP-MS analysis. These analytical techniques commonly require substantially higher-purity water.

Is Type IV water the same as deionised water?

No automatic equivalence should be assumed. Deionisation is a purification process, whereas ASTM Type IV describes a reagent-water specification. ASTM states that Type IV water may be produced using several technologies, including ion exchange, reverse osmosis, electrodialysis and distillation. ASTM Store

Is ASTM Type IV the same as ISO 3696 Grade 3?

No. ASTM D1193 and ISO 3696 are separate standards. ISO 3696 defines three grades, while ASTM D1193 defines four reagent-water types. ASTM Store

What volumes are available?

Available quantities range from 100 ml to 27,000 litres. Niche Office Solutions Ltd

Is a Certificate of Analysis provided?

Yes. A Certificate of Analysis and full batch traceability are provided. Niche Office Solutions Ltd

Does the water contain chemical additives?

No chemical additives are stated. Niche Office Solutions Ltd

What is the shelf life?

The stated shelf life is six months when stored correctly. Niche Office Solutions Ltd

Further Information and Authoritative Sources

Niche Healthcare – Type IV Pre-treated Water:
https://www.nicheofficesolutions.co.uk/product/type-iv-pre-treated-water/

Niche Healthcare – Type III General Lab Water:
https://www.nicheofficesolutions.co.uk/product/type-iii-general-lab-water/

Niche Healthcare – Type II Analytical Water:
https://www.nicheofficesolutions.co.uk/product/type-ii-analytical-water/

Niche Healthcare – Type I Ultrapure Water:
https://www.nicheofficesolutions.co.uk/product/type-i-ultrapure-water/

ASTM International – ASTM D1193 Standard Specification for Reagent Water:
https://store.astm.org/d1193-06r18.html

International Organization for Standardization – ISO 3696:1987, Water for Analytical Laboratory Use:
https://www.iso.org/standard/9169.html

Conclusion

Type IV Pre-treated Water provides laboratories, healthcare facilities and technical organisations with a defined ready-to-use water supply for appropriate general operations and water-treatment feed applications.

The product’s published specification includes 0.2 MΩ resistivity, 5 µS/cm conductivity, pH 5.8, ≤50 µg/L sodium and ≤50 µg/L chloride, together with full batch traceability and a Certificate of Analysis. Quantities ranging from 100 ml to 27,000 litres support requirements from smaller applications to substantial bulk-water supply. Niche Office Solutions Ltd

Type IV water is particularly relevant to compatible cooling circuits and as feedwater for reverse osmosis, deionisation and distillation systems. Selection should be based on the complete requirements of the individual equipment or process rather than the Type IV designation alone.

Downloadable Resources:

Laboratory Water Specification Sheet

Published by Maisie McNamara | Clinical Marketing Team

Laboratory Water Infographic

Laboratory Water Infographic

 

 

See our full selection:

Healthcare Supplies in Aberdeen | Niche Healthcare

Healthcare Supplies in Basildon | Niche Healthcare

Healthcare Supplies in Basingstoke | Niche Healthcare

Healthcare Supplies in London | Niche Healthcare

 

For procurement details, bulk purchasing, and further product information, contact our team today on 01274 965089 or check out our website at www.nicheofficesolutions.co.uk / www.nicheofficesolutions.co.uk/niche-nhs

Further clinical information can be found on our blog page: www.nicheofficesolutions.co.uk/category/niche-healthcare-news

For products not found on our online website, please view our Healthcare catalogues: www.nicheofficesolutions.co.uk/healthcare-catalogues

View our Healthcare YouTube videos Playlist

If you have any additional questions, drop us an email at info@nicheofficesolutions.co.uk 

Reviews

There are no reviews yet.

Be the first to review “Type IV Pre-treated Water”

Your email address will not be published. Required fields are marked *